Indirect restorations
Indirect restorations redistribute load and replace lost form, but they also require preparation and long-term maintenance. Design, material and cementation must be selected as one compatible plan.
Quick revision summary
Match coverage to the remaining tooth
An inlay lies within the cusps, an onlay covers selected cusps, an overlay covers the occlusal surface and a crown provides circumferential external coverage. These terms describe different designs and tissue costs.
Prepare and record without losing the plan
Preparation should provide the required geometry and material space while conserving tissue and avoiding damage to adjacent teeth. A path of insertion, suitable internal form and readable margins matter. Excessive taper or short walls can compromise conventional retention.
Protect the result and plan for failure
Choose the luting strategy from material, retention form, substrate and isolation, then follow the complete instructions. Remove excess cement, check proximal access and reassess occlusion. A margin that cannot be cleaned or excess cement below the gingiva can cause biological problems even if retention is excellent.
Common mistake
A post retains a core; it does not strengthen a root. Glass ceramic and zirconia also require different conditioning rather than one universal cementation recipe.
Indirect restorations
Indirect restorations redistribute load and replace lost form, but they also require preparation and long-term maintenance. Design, material and cementation must be selected as one compatible plan.
Match coverage to the remaining tooth
An inlay lies within the cusps, an onlay covers selected cusps, an overlay covers the occlusal surface and a crown provides circumferential external coverage. These terms describe different designs and tissue costs. A full crown is not automatically the most conservative or most durable choice for every damaged tooth. Assess what needs protection and what useful tissue can remain.
Record remaining walls, cusp support, cracks, margins, pulp and apical health, periodontal support and occlusion. A terminal tooth, heavy parafunction or absent neighbouring contacts can alter loading. Compare direct repair, partial coverage and full coverage where feasible. A technically impressive indirect restoration cannot make an unrestorable root or uncontrolled disease environment predictable.
| Design | Coverage | Main planning question |
|---|---|---|
| Inlay | Within cusps | Are remaining cusps sufficiently supported? |
| Onlay | Selected cusps | Which cusps need protection? |
| Overlay | Whole occlusal surface | Can axial tissue be preserved? |
| Crown | Circumferential external coverage | Does the benefit justify tissue removal? |
| Endocrown | Chamber-retained coronal restoration | Is adhesive retention suitable in this root-filled posterior tooth? |
Consider ferrule, core and root-filled teeth
For a planned extra-coronal restoration on a root-filled tooth, an adequate collar of sound supramarginal dentine provides a ferrule effect. Its distribution and thickness matter alongside height and residual walls. Assess whether obtaining it would sacrifice excessive tissue or periodontal support. Do not assume a numerical target alone establishes restorability in every tooth.
A post is used when needed to retain a core; it does not strengthen the root or compensate for absent ferrule. Unnecessary post-space preparation removes dentine and creates risks. Selected root-filled molars may be candidates for an endocrown where chamber retention, adhesive isolation and the whole tooth make it suitable. The definitive restoration should be planned before endodontic treatment is completed.
Choose material with the required space and load
Metal, glass ceramic, zirconia and indirect resin-based materials differ in strength, thickness requirements, aesthetics, bonding and adjustment. The manufacturer’s indications define the preparation and cementation limits for the specific product. Do not generalise a minimum thickness or surface treatment from one ceramic family to another or assume that a more translucent zirconia behaves like every other zirconia.
Consider opposing teeth, load, space, margin location, substrate colour and the patient’s preferences. Aesthetic demands may compete with available thickness or retention. Laboratory communication should identify the tooth, design, material, shade information, margin and occlusal requirements. A clear prescription helps avoid receiving a restoration that requires an incompatible luting strategy.
Prepare and record without losing the plan
Preparation should provide the required geometry and material space while conserving tissue and avoiding damage to adjacent teeth. A path of insertion, suitable internal form and readable margins matter. Excessive taper or short walls can compromise conventional retention. For an adhesive design, accessible margins and isolation are critical, and undercuts or sharp features may interfere with fabrication and fit.
A scan or impression must capture the intended margins and surrounding tissues accurately. Manage tissue health and fluid rather than relying on the scanner to invent an obscured edge. Provide an effective provisional where required to protect tissue, maintain contacts and test the intended form. Provisional discomfort or instability deserves assessment before definitive cementation.
Try in and use material-specific surface treatment
Check seating, margins, contacts, contour, shade and occlusion before cementation. An incompletely seated restoration may feel high because of a tight contact or internal interference; simply adjusting its occlusal surface can conceal the real problem. Confirm fit with appropriate methods and resolve discrepancies before the material becomes bonded or cemented.
Glass ceramics and zirconia require different surface conditioning. Hydrofluoric-acid etching and silane protocols apply to suitable glass ceramics, while zirconia uses a different manufacturer-approved approach, commonly including appropriate abrasion and a compatible primer or cement. Hydrofluoric acid is hazardous and is not a universal intraoral conditioning agent. Cleaning after try-in and adhesive compatibility also require attention.
Protect the result and plan for failure
Choose the luting strategy from material, retention form, substrate and isolation, then follow the complete instructions. Remove excess cement, check proximal access and reassess occlusion. A margin that cannot be cleaned or excess cement below the gingiva can cause biological problems even if retention is excellent. Record products and relevant findings for future review.
Discuss possible pulp complications, loss of retention, fracture, chipping, wear and recurrent disease. A local defect may sometimes be repaired; other failures require replacement or extraction. Review symptoms, tissue health, contacts and maintenance. Long-term success depends on the tooth, interface, restoration and patient-level disease control working together, not the label of the material alone.
A distinction to remember
A post retains a core; it does not strengthen a root. Glass ceramic and zirconia also require different conditioning rather than one universal cementation recipe.
A crown appears high at try-in and has a very tight proximal contact. What should be established before occlusal adjustment?
Reveal the reasoning
Confirm that the crown is fully seated and assess contact or internal interferences, fit and margins. A partially seated crown can appear high. Resolve the cause before changing occlusal anatomy or cementing, then recheck the full contact and occlusal relationship.
Guidance to read alongside this chapter
- European Society of Endodontology · Position statement: restoration of root filled teeth (2021)
- Ivoclar · Pre-treatment of restorations before adhesive cementation
- FDI World Dental Federation · Alternative direct restorative materials to dental amalgam (2023)
- FDI World Dental Federation · Repair of restorations
Test your recall
How do an onlay and a crown differ?
Show answer
An onlay covers selected cusps, while a crown provides circumferential external coverage. Their tissue removal, retention and bonding requirements differ. The appropriate choice depends on remaining structure, cracks, load, margins and material rather than assuming full coverage is always required.
